No products in the cart.
| System | 2-way full range, Active Array Element |
| AMP Power | 800W Continuous, Bi-AMP (Class D-650 W LF, Class AB-150W HF), 3200W Peak |
| Speaker | 2 x 1” Celestion Neodymium Compression Driver, 1.75” Voice Coil, -80W-RMS / 320W-Peak, Horn loaded / 2 x 8” Celestion Neodymium MID Woofer, Water Resistant Coating, 2“ Voice Coil, 400W-RMS / 1600W Peak, with Wave guide |
| Frequency Response (+/-3dB) | 70 Hz – 19 kHz |
| MAX SPL @ 1m | 121dB (continuous) / 127dB (peak) |
| Crossover (MID-High) | 1.8 kHz |
| Dispersion (-6dB) | 110º Horizontal / 10° Vertical |
| Cooling | Passive Cooling + Inside Fan |
| Input Connector | XLR In / Link / DSP Module with RJ45 Date In & Link Cascading Connector |
| External Controls | 9 Preset EQ / 1 Service Use / Power ON with Green LED / Clip / SIG / PROT With LED |
| DSP Processor | 32 bit , 24bit/48kHz Audio conversion AD/DA, Digital Volume Control |
| Electronic Protections | Thermal / Convection-Fan / Overload / Digital Limiter / Compressor |
| Mains Connector | Neutrik PowerCON Connector In & Out |
| Mains Connector | 16A UL & VDE & SEV |
| Power Supply | Auto-Range 100V-120V / 220V-240V 50Hz/60Hz |
| Enclosure Construction | 18mm Birch Plywood, Resistant Black Paint, 1.5T Metal Grille with Foam, Two Handles on Each Side, Water Resistant Coating |
| Mounting | 3-point Suspension, Horizontal Trapezoid 2 x 7.5°, Three configuration styles (Small, Stack & Array) |
| Dimensions (HxWxD) | 556 x 388 x 753 mm / 22 x 15 x 30 inch |
| Net Weight | 22.5 kg / 49.5 Ibs |
| Accessories | Flybar / Adaptor / Ground stacking bar / Flying Pin / DSP control center |
Reviews
There are no reviews yet.
Related products
Mic wireless
Active Speaker
Active Speaker
Mic wireless
Active Subwoofer
Mixer
Active Speaker
Be the first to review “TOPP PRO APX 28 HA LINE ARRAY”